Selleys Knead It Steel Epoxy Repair System – 110g
Selleys Knead It Steel Epoxy Repair System – 110g is a versatile hand-kneadable, fast-setting, non-rusting co-extruded epoxy repair method for metal products.
Features:
- There will be no sagging, running, or dripping.
- It’s simple to use and there’s no mess.
- One hour after mixing, it can be drilled, sawed, sanded, filed, tapped, machined, or painted.
- Good adhesion properties.
- It’s possible to reshape, reconstruct, and repair a wide range of surfaces and applications with it.
Suitable for these materials:
- Steel
- Wide range of ferrous metal and aluminium items
- Most plastics* (pre-test required)
- Glass
How to use:
- Before cleaning, roughen the bond region for the best results.
- Remove all grease, grime, and dust from the surface.
- Remove the required amount of material.
- On the remaining portion, replace the disc.
- To avoid smearing your hands, wear gloves.
- To mix, knead with your fingers until the colour is uniform. Warm to room temperature if mixing is difficult.
- Apply with pressure to the damaged surface (within 2 minutes of mixing) and shape as needed.
- If the material adheres to your fingers, push it in place using the plastic wrapping.
- Remove excess and hand wipe with water or damp cloth before hardening begins for a smooth appearance.
- Before the initial hardening, trim away any excess. Before the initial hardening, clean any residues with acetone. Once the excess has hardened, it can be sanded or trimmed away.
- It will harden in 5-10 minutes and begin to establish a solid bond.
- After each use, thoroughly wash hands with soap and water.
Browse through the rest of our range of Selleys Products.
Reviews
There are no reviews yet.