Selleys Autofix Araldite 5 Minute 24ml
Selleys Autofix Araldite 5 Minute 24ml is a clear, fast-setting two-part epoxy that forms a rigid, long-lasting bond to a variety of surfaces. This tube comes with resin and a hardener. This fast-setting adhesive is light yellow and dries clear.
Features:
- Two-part epoxy adhesive that cures quickly
- Product comes in a syringe pack
- Simple to use
- Chemical resistance is excellent
- High bond strength develops quickly
- Resin in a light yellow colour with a clear hardener
- Dries clear for a neat finish
Can be used to:
- As a general adhesive for plastics, metal and wood
- Fixing cracked rigid plastics
- Repairing control knobs
Can be used on:
- Rigid plastics except for Polyethylene or Polypropylene
- Wool
- Glass
- Leather
- Metal
- Fabric
How to Use:
- Make sure surfaces are clean and dry.
- Remove cap and cut off the tip that seals the syringe nozzle.
- Mix this adhesive together on a disposable surface using equal amounts of both parts, then apply it to both surfaces you want to glue together.
Tips:
- Large quantities accelerate curing time.
- Use smaller quantities if you want to work for longer.
- Scrape or sand the product off to remove after it has cured.
- Solvent will not dissolve this product since it is resistant to chemicals.
- If you want to reposition anything after curing, make sure it is heat resistant, put it in the oven at 150°C slowly. Once the adhesive has liquified, reposition as necessary and scrape any excess off.
- Clamp for a sturdier bond.
- Colder weather may require longer time for a bond.
- Remove any uncured product with acetone.
- Maximum bond strength reached in 16 hours.
- Don’t put unnecessary strain on the bond for 30 minutes.
- To make sure the joint is in place properly, hold or join it together with tapes or apply weight.
Browse through the rest of our range of Sealants and Adhesives.
Reviews
There are no reviews yet.