Selleys No Mould Silicone Sealant
Selleys No Mould Silicone Sealant is a specially designed formulation to create a durable and waterproof seal in areas where mould resistance is super important.
Suitable for:
Ceramic, Glazed & porcelain fixtures, Aluminium, Plastic laminates, Some rubbers, Glass, Stainless Steel
Can be used in areas:
Kitchens, bathrooms, showers, tiles, basins, worktops, laundries and spas
How to use:
- Before applying your new sealant we recommend spraying Selleys Rapid Mould Killer into the gap to kill any residual mould.
- Thoroughly clean surface where the sealant will be applied with turps and dry completely.
- Cut nozzle at 45°angle, cut cartridge tip and fit nozzle.
- Place in a caulking gun, apply with steady pressure, ensuring sealant is pushed into the joint.
- A tool with a spatula dipped in detergent water within 5-10 minutes of application.
- Clean up with turps before product skins
Limitations:
- +Compared to Selleys Wet Area
- #Sealant will be waterproof and shower ready in 1 hour after application in showers. The semi-cured sealant must not be touched until fully cured (at least 48 hours)
- *To maintain your sealant properties, ensure you regularly clean off any soap scum and dirt as these encourage mould growth
- Not suitable for aquariums, food or drinking water contact, permanent immersion in water, or metals other than aluminium and stainless steel. Not suitable for PE, PP, PTFE and some rubbers. Pre-test on other surfaces for compatibility
Caution:
- Store in a dry place below 30°C.
- Use within 6 months of opening.
Features:
- Resists lifting
- Superior formulation to stop mould growth
- The fast skinning formulation means you can use your shower in 1 hour
- Provides a durable waterproof seal
Reviews
There are no reviews yet.